|
Always pretest an area to be
cleaned to insure compatibility with
the cleaner. CarpetGeneral® Carpet
Traffic Lane Cleaner 4106 can be
used as received or diluted with
water, depending upon the nature and
severity of the soils to be removed.
When diluting with water always add
the product to water to avoid
splashing of the alkaline solution.
PRE-SPRAY: Dilute 1:8 (16 oz. per
gallon) with water. Apply product
using pressure or pump-up
applicator. Pay particular attention
to traffic lanes and heavily soiled
areas. Allow product to dwell for 5
to 15 minutes. For maximum results,
rake carpet to loosen matted carpet
fibers in traffic areas to increase
soil removal. Scrub clean with
industry approved methods. Please
refer to the MSDS for proper safety
instructions.
ROTARY SPIN BONNET: Dilute 1:16 (8
ounces per gallon) with water. Mix
solution in a pump-up or pressure
sprayer applicator. Generously
pre-spray carpet and allow 5 to 10
minutes dwell time. Do not allow to
dry. Lightly spray the bonnet pad
before bonneting. As the pad becomes
soiled, turn over or replace.
IMMERSION METHODS: Immerse bonnet
pad in diluted solution, then wring
out tightly. Position bonnet on
rotary floor machine. When both
sides of the pad are soiled, rinse
in clear water, wring out tightly,
and re-soak in cleaning solution
before proceeding.
Please refer to the MSDS for proper safety instructions. |
Water based
