| |
|
|
|
|
|
|
|
CarpetGeneral®
Carpet Stain Remover 4285:
Carpet Stain Remover, Carpet Spot
Remover, Carpet Pre-Spray |
|
|
|
|
| |
 |
|
|
|
| |
 |
PRODUCT DESCRIPTION: Carpet Stain Remover, Carpet Spot
Remover, Carpet Pre-Spray |
|
|
| |
CarpetGeneral®
Carpet Stain Remover 4285 is a heavy-duty water based preconditioner, cleaner and degreaser. Its exceptional power will improve any cleaning situation by quickly emulsifying stubborn ground in dirt, grease, soot, fire damage and filtration soil on carpet, hard surfaces or even concrete driveways. This saves on cleaning or rinsing solution creating less waste water, and reduces labor by decreasing the number of passes needed to thoroughly clean. |
|
|
|
|
|
 |
TYPICAL PROPERTIES: |
|
|
|
|
|
| |
| Appearance: |
Clear, green liquid |
| Odor: |
Citrus |
| pH: |
13 |
| Flash Point: |
None |
| Wt/Gal: |
8.9 |
| VOC: |
0.4 lbs/gal (EPA Method 24) |
|
|
|
|
|
|
 |
BENEFITS: |
|
|
|
|
|
|
 Water based
Widespread utility
Low VOC |
|
|
|
|
|
 |
RECOMMENDED APPLICATION:
Carpet Stain Remover, Carpet Spot
Remover, Carpet Pre-Spray |
|
|
|
|
|
|
Always pretest an area to be cleaned to insure compatibility with the cleaner. CarpetGeneral®
Carpet Stain Remover 4285 can be used as received or diluted with water, depending upon the nature and severity of the soils to be removed. When diluting with water always add the product to water to avoid splashing of the alkaline solution.
FOR CARPETS, UPHOLSTERY, CLOTHES, AND NON-WASHABLES: Spray stained area thoroughly, wait 60 seconds. Agitate to saturate the fibers. Blot or gently rub area with a clean, absorbent cloth. Repeat until stain is removed. Blot any excess moistureno need to vacuum; dries quickly.
FOR REAPPEARING STAINS: Repeat above steps, then place a clean, white cloth or paper towel over the treated area, followed by something flat and heavy like a stack of books. After a few hours, the towel absorbs any excess stain residue and moisture that wicks to the top.
FOR WASHABLES: Spray stain thoroughly and wait 60 seconds. Agitate to saturate the fibers. Launder as fabric recommendations allow. Repeat if necessary.
FOR WALLS, COUNTERTOPS, FLOORS, AND TILE: Spray stain thoroughly, wait 60 seconds. Wipe with a clean cloth or rinse thoroughly. Repeat if necessary.
Please refer to the MSDS for proper safety instructions. |
|
|
|
|
|
 |
MATERIAL COMPATIBILITY: |
|
|
|
|
|
|
Avoid strong oxidizing agents (i.e. bleach), strong bases (i.e. ammonia) and soft metals such as aluminum at elevated temperatures. |
|
|
|
|
|
 |
SHIPPING: |
|
|
|
|
|
|
CarpetGeneral®
Carpet Stain Remover 4285 is shipped in 1-gallon plastic bottles or 5-gallon plastic pails. |
|
| |
|
|
| |
Note: The information presented herein is our interpretation of certain test results and field experience to date. The information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verificatio |
|
| |
Carpet Stain
Remover, Carpet Spot Remover, Carpet Pre-Spray |
|
|
|
